Data I/O Routines

cgio_read_data_type

C Signature

int cgio_read_data_type(int cgio_num, double id, const cgsize_t *s_start, const cgsize_t *s_end, const cgsize_t *s_stride, const char *m_data_type, int m_num_dims, const cgsize_t *m_dims, const cgsize_t *m_start, const cgsize_t *m_end, const cgsize_t *m_stride, void *data)

Fortran Signature

subroutine  cgio_read_data_type_f(cgio_num, id, s_start, s_end, s_stride, m_data_type, m_num_dims, m_dims, m_start, m_end, m_stride, data, ier)

Parameters

cgio_num	IN: Database identifier.
id	Node identifier.
s_start	Starting indices for data in the database. Fortran indexing is used (starting at 1).
s_end	Ending indices for data in the database. Fortran indexing is used (starting at 1).
s_stride	Step increment for data in the database.
m_num_dims	Number of dimensions for data in memory.
m_dims	Dimension values for data in memory.
m_start	Starting indices for data in memory. Fortran indexing is used (starting at 1).
m_end	Ending indices for data in memory. Fortran indexing is used (starting at 1).
m_stride	Step increment for data in memory.
m_data_type	Type of data being used for data in memory. One of “I4”, “I8”, “U4”, “U8”, “R4”, “R8”, “C1”, or “B1”.
data	Array of data to be read.

Returns

ier - Error status

Modes

r w m

Description

This routine provides general purpose read capabilities from the node identified by id in the database given by cgio_num. It allows for a general specification of the starting location within the data as well as fixed step lengths (strides) through the data from the initial position. This capability works for both the data on disk and the data being stored in memory. One set of vectors (s_start, s_end and s_stride) are used to describe the mapping of the data within the node, and a second set of vectors (m_start, m_end and m_stride) are used to describe the mapping of the desired data within memory.

The memory dimensions are given by m_num_dims and m_dims. There is no requirement that the node dimensions and memory dimensions match, only that the total number of values to be read are the same for the node and memory specifications.

The data are stored in both memory and on disk in “Fortran ordering”. That is, the first index varies the fastest, and indexing starts at 1. Negative indexing is not allowed.

Be careful when writing data using cgio_write_all_data() and then using cgio_read_data_type() to randomly access the data. cgio_write_all_data_type() takes a starting address in memory and writes N words to disk, making no assumption as to the order of the data. cgio_read_data_type() assumes that the data have Fortran-like ordering to navigate through the data in memory and on disk. It assumes that the first dimension varies the fastest. It would be easy for a C program to use the default array ordering (last dimension varying fastest) and write the data out using cgio_write_all_data_type(). Then another program might use cgio_read_data_type() to access a subsection of the data, and the routine would not return what was expected.

There can be a significant performance penalty for using cgio_read_data_type() when compared with cgio_read_all_data_type(). If performance is a major consideration, it is best to organize data to take advantage of the speed of cgio_read_all_data_type().

The function returns 0 on success, else an error code.

cgio_read_all_data_type

C Signature

int cgio_read_all_data_type(int cgio_num, double id, const char *m_data_type, void *data)

Fortran Signature

subroutine  cgio_read_all_data_type_f(cgio_num, id, m_data_type, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
m_data_type	Type of data being used for data in memory. One of “I4”, “I8”, “U4”, “U8”, “R4”, “R8”, “C1”, or “B1”.
data	Array of data to be read.

Returns

ier - Error status

Modes

r w m

Description

Reads all the data from the node identified by id in the database given by cgio_num. On success, the function returns 0 and the data in data, else an error code is returned. Note: Data is returned in Fortran indexing order.

cgio_read_block_data_type

C Signature

int cgio_read_block_data_type(int cgio_num, double id, cgsize_t b_start, cgsize_t b_end, const char *m_data_type, void *data)

Fortran Signature

subroutine  cgio_read_block_data_type_f(cgio_num, id, b_start, b_end, m_data_type, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
b_start	Starting offset (index) for the data in the database. Fortran indexing is used (starting at 1).
b_end	Ending offset (index) for the data in the database. Fortran indexing is used (starting at 1).
m_data_type	Type of data being used for data in memory. One of “I4”, “I8”, “U4”, “U8”, “R4”, “R8”, “C1”, or “B1”.
data	Array of data to be read.

Returns

ier - Error status

Modes

r w m

Description

Reads a contiguous block of data from the node identified by id in the database given by cgio_num. On success, the function returns 0 and the data in data, else an error code is returned. The starting index is given by b_start and the end by b_end. Note: Fortran indexing order for multi-dimensional data is used when computing the starting and ending locations.

cgio_write_data

C Signature

int cgio_write_data(int cgio_num, double id, const cgsize_t *s_start, const cgsize_t *s_end, const cgsize_t *s_stride, int m_num_dims, const cgsize_t *m_dims, const cgsize_t *m_start, const cgsize_t *m_end, const cgsize_t *m_stride, void *data)

Fortran Signature

subroutine  cgio_write_data_f(cgio_num, id, s_start, s_end, s_stride, m_num_dims, m_dims, m_start, m_end, m_stride, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
s_start	Starting indices for data in the database. Fortran indexing is used (starting at 1).
s_end	Ending indices for data in the database. Fortran indexing is used (starting at 1).
s_stride	Step increment for data in the database.
m_num_dims	Number of dimensions for data in memory.
m_dims	Dimension values for data in memory.
m_start	Starting indices for data in memory. Fortran indexing is used (starting at 1).
m_end	Ending indices for data in memory. Fortran indexing is used (starting at 1).
m_stride	Step increment for data in memory.
data	Array of data to be read or written.

Returns

ier - Error status

Modes

- w m

Description

This function is similar to cgio_read_data_type(), but writes the data from memory to the node.

cgio_write_data_type

C Signature

int cgio_write_data_type(int cgio_num, double id, const cgsize_t *s_start, const cgsize_t *s_end, const cgsize_t *s_stride, const char *m_data_type, int m_num_dims, const cgsize_t *m_dims, const cgsize_t *m_start, const cgsize_t *m_end, const cgsize_t *m_stride, void *data)

Fortran Signature

subroutine  cgio_write_data_type_f(cgio_num, id, s_start, s_end, s_stride, m_data_type, m_num_dims, m_dims, m_start, m_end, m_stride, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
s_start	Starting indices for data in the database. Fortran indexing is used (starting at 1).
s_end	Ending indices for data in the database. Fortran indexing is used (starting at 1).
s_stride	Step increment for data in the database.
m_num_dims	Number of dimensions for data in memory.
m_dims	Dimension values for data in memory.
m_start	Starting indices for data in memory. Fortran indexing is used (starting at 1).
m_end	Ending indices for data in memory. Fortran indexing is used (starting at 1).
m_stride	Step increment for data in memory.
m_data_type	Type of data being used for data in memory. One of “I4”, “I8”, “U4”, “U8”, “R4”, “R8”, “C1”, or “B1”.
data	Array of data to be read or written.

Returns

ier - Error status

Modes

- w m

Description

This function is similar to cgio_read_data_type(), but writes the data from memory to the node.

cgio_write_all_data

C Signature

int cgio_write_all_data(int cgio_num, double id, void *data)

Fortran Signature

subroutine  cgio_write_all_data_f(cgio_num, id, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
data	Array of data to be written.

Returns

ier - Error status

Modes

- w m

Description

This function is similar to cgio_read_all_data_type(), but writes the data from memory to the node.

cgio_write_all_data_type

C Signature

int cgio_write_all_data_type(int cgio_num, double id, const char *m_data_type, void *data)

Fortran Signature

subroutine  cgio_write_all_data_type_f(cgio_num, id, m_data_type, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
m_data_type	Type of data being used for data in memory. One of “I4”, “I8”, “U4”, “U8”, “R4”, “R8”, “C1”, or “B1”.
data	Array of data to be written.

Returns

ier - Error status

Modes

- w m

Description

This function is similar to cgio_read_all_data_type(), but writes the data from memory to the node.

cgio_write_block_data

C Signature

int cgio_write_block_data(int cgio_num, double id, cgsize_t b_start, cgsize_t b_end, void *data)

Fortran Signature

subroutine  cgio_write_block_data_f(cgio_num, id, b_start, b_end, data, ier)

Parameters

cgio_num	Database identifier.
id	Node identifier.
b_start	Starting offset (index) for the data in the database. Fortran indexing is used (starting at 1).
b_end	Ending offset (index) for the data in the database. Fortran indexing is used (starting at 1).
data	Array of data to be written.

Returns

ier - Error status

Modes

- w m

Description

This function is similar to cgio_read_block_data_type(), but writes the data from memory to the node.